MOTOBRICK.COM

TECHNICAL MOTOBRICK WRENCHING In Remembrance of Inge K. => The Motobrick Workshop => Topic started by: Jez on November 06, 2016, 02:46:09 AM

Title: Relay identification.
Post by: Jez on November 06, 2016, 02:46:09 AM

 Hi all, I could do with a picture of relays, bulb monitor device etc and identification for a 89-90 k100rs 4v, have done a search and can't find a thing. If someone could point me in the right direction that would be really useful, the Clymer manual is useless in this respect. I am in the middle of removing all the ABS, I have identified a lot of wiring but not quite there and confirmation of relays would complete the process.  Thanks Jez

Title: Re: Relay identification.
Post by: rbm on November 06, 2016, 06:29:50 AM

K-bike Relay Box Layouts (http://www.motobrick.com/index.php?topic=536.0)

Title: Re: Relay identification.
Post by: Jez on November 07, 2016, 01:59:57 PM

Thanks for the pointer Robert, this is a photo of my relays. So makes it a ABS 1 bike. Were is the fuel pump relay ? Thanks Jez

Title: Re: Relay identification.
Post by: Jez on November 07, 2016, 02:02:51 PM

 The additional wiring over the original loom, I think is the heated grips which were a later addition.

Title: Re: Relay identification.
Post by: Filmcamera on November 07, 2016, 03:02:57 PM

it is the one next to the light blue one - the other side of the loom with the additional wiring

Title: Re: Relay identification.
Post by: Jez on November 07, 2016, 04:29:44 PM

Thanks, can see it now !