MOTOBRICK.COM

TECHNICAL MOTOBRICK WRENCHING In Remembrance of Inge K. => The Motobrick Workshop => Topic started by: frodef on August 28, 2011, 04:43:19 PM

Title: Tyre valve size
Post by: frodef on August 28, 2011, 04:43:19 PM

I'm looking at replacement tyre valves, and there seems to be more than one size available wrt. the hole the valve sits in. The standard appears to be a 11.5 mm hole, hopefully this is what will fit my K too?

Title: Re: Tyre valve size
Post by: frankenduck on August 28, 2011, 06:28:07 PM

The hole in the rim is 8mm.

Title: Re: Tyre valve size
Post by: wmax351 on August 28, 2011, 06:55:58 PM

I just took my old one to an auto parts store. Found a package that someone had stolen one of the 4, and the manager gave me 1/2 off. Everyone wins.

Title: Re: Tyre valve size
Post by: johnny on August 28, 2011, 07:10:46 PM

steel valve stems...

these to be exact... they are tire pressure monitor friendly... (http://www.revzilla.com/product/chrome-tubeless-valve-stem)

j o