MOTOBRICK.COM

TECHNICAL MOTOBRICK WRENCHING In Remembrance of Inge K. => The Motobrick Workshop => Topic started by: Laitch on September 16, 2016, 11:19:53 AM

Title: k75 and K100 Rear Disc Carrier Minimum Thickness Stamp
Post by: Laitch on September 16, 2016, 11:19:53 AM

The poll was to establish data concerning the .18" minimum stamped on some rear disc brake carriers—a minimum that seems at variance with published specs, that has the potential to cause conflicts at vehicle inspections, and that can result in unnecessary expense to owners attempting to comply with conflicting specs.

Title: Re: k75 and K100 Rear Disc Carrier Minimum Clearance Stamp
Post by: Martin on September 16, 2016, 06:11:26 PM

Laitch I know you are just surveying the rear but as I have three different types of non OEM  carriers and discs I just checked. Grimeca carrier not marked, EBC carrier not marked, Metal Gear disc marked min thickness 3.5mm.
Regards Martin.

Title: Re: k75 and K100 Rear Disc Carrier Minimum Clearance Stamp
Post by: Laitch on September 16, 2016, 06:21:28 PM

The poll has been closed; the result indicates an overwhelming disinterest by MOTOBRICK.commies in the K75 rear brake carrier thickness warning anomaly.

As the only voter in the poll, Martin—besides me, of course—you will receive a paper mâché facsimile of the Maryland Department of Motor Vehicles Motorcycle Inspection Compliance Award as soon as it meets specifications.

We return now to the ranting and bedwetting of the electorate in the US presidential campaign.