MOTOBRICK.COM

TECHNICAL MOTOBRICK WRENCHING In Remembrance of Inge K. => The Motobrick Workshop => Topic started by: Laitch on August 30, 2016, 05:24:20 PM

Title: Progressive 465 Shock Absorber Orientation Revealed
Post by: Laitch on August 30, 2016, 05:24:20 PM
Which way is up has been a topic discussed here. Attached is Progressive Suspension's written guidance regarding up as it relates to their 465 Series shocks—received today.
Title: Re: Progressive 465 Shock Absorber Orientation Revealed
Post by: kennybobby on August 30, 2016, 09:33:56 PM
Thanks for posting, so bare shaft is up--that's the way i've run my OEM shock too.
Title: Re: Progressive 465 Shock Absorber Orientation Revealed
Post by: jjs1234 on September 16, 2016, 03:58:51 PM
Maybe it's just me, but it's the worst shock ever, makes my rear end feel like a pogo stick

Sent from my HUAWEI MT7-L09 using Tapatalk

Title: Re: Progressive 465 Shock Absorber Orientation Revealed
Post by: Laitch on September 16, 2016, 06:54:52 PM
Maybe it's just me, but it's the worst shock ever, makes my rear end feel like a pogo stick
I've got a 465. I set it to give me a firm ride over the potholes with no loss of body part identity. It does what I expected. I weigh about 190 lbs. The 412 probably would have been good enough.  It's unlikely I'll ever be a suspension connoisseur.
Title: Re: Progressive 465 Shock Absorber Orientation Revealed
Post by: Laitch on September 16, 2016, 07:26:30 PM
makes my rear end feel like a pogo stick
On second thought, maybe you actually meant ping-pong ball. Clarity is needed here although not too much clarity.
Title: Re: Progressive 465 Shock Absorber Orientation Revealed
Post by: jay1622 on November 10, 2016, 03:42:06 PM
I've got a 465. I set it to give me a firm ride over the potholes with no loss of body part identity. It does what I expected. I weigh about 190 lbs. The 412 probably would have been good enough.  It's unlikely I'll ever be a suspension connoisseur.

Hey there Laitch, good afternoon. I stumbled upon this post researching a new rear shock for my rebuild. I bought the 412 for mine, and believe me... It sucks. If I keep the bike, I'll consider a Wilburs or something with a refinished seat from Sargeant. Until then, rest assured my friend... You are much better off with anything else than the 412.
Title: Re: Progressive 465 Shock Absorber Orientation Revealed
Post by: F14CRAZY on November 10, 2016, 04:49:03 PM
Maybe I need to experience something other than a 412. I've put like 40k miles on mine and it seems fine
Title: Re: Progressive 465 Shock Absorber Orientation Revealed
Post by: Laitch on November 10, 2016, 04:50:33 PM
. . .  rest assured my friend... You are much better off with anything else than the 412.
The key to satisfaction, jay, is keeping your expectations as low as possible then lowering them some more if they weren't low enough. :giggles
Title: Re: Progressive 465 Shock Absorber Orientation Revealed
Post by: Chaos on November 10, 2016, 09:01:13 PM
Having ridden way too many miles with a blown out Works shock that bottomed like a ball pean hammer hitting an anvil on every bump, the 412 is a gift from the heavens.