MOTOBRICK.COM

TECHNICAL MOTOBRICK WRENCHING In Remembrance of Inge K. => The Motobrick Workshop => Topic started by: BAMBAM1039 on April 15, 2016, 01:20:03 PM

Title: K1004v TO K11004v ENGINE SWAP
Post by: BAMBAM1039 on April 15, 2016, 01:20:03 PM

has anyone swapped a k1004v for a k11004v engine the specs say the bore goes from 67 mm to 70 mm are there any other problems with this swap   does anyone know if throttle bodies were bigger or the same as k100

Title: Re: K1004v TO K11004v ENGINE SWAP
Post by: The Mighty Gryphon on April 15, 2016, 01:24:37 PM

Max BMW parts fiches are your friend.  Compare part numbers. 

http://www.maxbmwmotorcycles.com/fiche/DiagramsMain.aspx?vid=51709&rnd=04282014

http://www.maxbmwmotorcycles.com/fiche/DiagramsMain.aspx?vid=51713&rnd=07012015

Title: Re: K1004v TO K11004v ENGINE SWAP
Post by: BAMBAM1039 on April 15, 2016, 01:31:21 PM

Good start thanks

Title: Re: K1004v TO K11004v ENGINE SWAP
Post by: TrueAce on April 15, 2016, 03:29:21 PM

Hey BAMBAM, how about posting pics of your bikes?

Title: Re: K1004v TO K11004v ENGINE SWAP
Post by: BAMBAM1039 on April 15, 2016, 03:38:06 PM

I have a big weekend planned but i will try to make some time to down load. victory has engine out for cams and intake zx 1100turbo is fine and k1 I pic up next sat in north carolina  very excited it will be my first bmw hoping not the last.  just bought on ebay 2 weeks ago  thanks for asking