MOTOBRICK.COM

TECHNICAL MOTOBRICK WRENCHING In Remembrance of Inge K. => The Motobrick Workshop => Topic started by: Swede on January 29, 2016, 01:49:03 PM

Title: Scrambler seat
Post by: Swede on January 29, 2016, 01:49:03 PM

Hello
Any idea on the saddle of my winter Project

No driveshaft inside!

Title: Re: Scrambler seat
Post by: Laitch on January 29, 2016, 01:57:10 PM

Welcome, Swede! I'll start you off with this link.
http://vonzeti.com/product-category/custom-seat-units-cafe-racer-motorcycle/

Title: Re: Scrambler seat
Post by: K1300S on January 29, 2016, 03:19:57 PM

Do not let your rear suspension hang like that.   Causes damage to driveshaft boot and ujoint....

Title: Re: Scrambler seat
Post by: Laitch on January 29, 2016, 07:04:53 PM

Nice catch, Marshall!

Title: Re: Scrambler seat
Post by: K1300S on January 29, 2016, 08:43:29 PM

i am learning......

Title: Re: Scrambler seat
Post by: Swede on January 30, 2016, 01:45:01 AM

Better?  :bmwsmile

Title: Re: Scrambler seat
Post by: Laitch on January 30, 2016, 07:17:11 AM

 :2thumbup:
What make, model and size are those tires, Swede?

Title: Re: Scrambler seat
Post by: Swede on January 30, 2016, 11:09:18 AM

Mitas 140/80-17  110/80-18