MOTOBRICK.COM

TECHNICAL MOTOBRICK WRENCHING In Remembrance of Inge K. => The Motobrick Workshop => Topic started by: 94K1100LTSE PG on January 27, 2016, 02:48:56 AM

Title: Front brake master cylinder size
Post by: 94K1100LTSE PG on January 27, 2016, 02:48:56 AM

Gents, does anyone know the piston size in the master cylinder for the front brakes on a 94 K1100LT? I am looking for some neat aftermarket ones so if anyone has a link to share that would be awesome.
PG

Title: Re: Front brake master cylinder size
Post by: Martin on January 27, 2016, 03:32:08 AM

I don't know about the K1100, but in the case of the 100's & 75's the size is cast into the M/Cyl on the left hand side of the reservoir.
Regards Martin.

Title: Re: Front brake master cylinder size
Post by: rbm on January 27, 2016, 07:59:38 AM

K1100 front MC is 20mm.

Title: Re: Front brake master cylinder size
Post by: 94K1100LTSE PG on January 27, 2016, 06:14:09 PM

Thanks folks.