MOTOBRICK.COM
TECHNICAL MOTOBRICK WRENCHING In Remembrance of Inge K. => The Motobrick Workshop => Topic started by: 94K1100LTSE PG on January 26, 2016, 11:50:27 PM
-
Good day folks, I am new to this forum having recently purchased a 94K1100LTSE. I am currently stripping the bike down to turn it into a scrambler/cafe racer type config and would like some advice on removing the ABS system.
I intend to renew the front and rear braking systems, with a new master cylinder on the front with new braided lines and a refurbished rear master cylinder, reservoir and braided lines.
If i could get some feedback on how or if the ABS brake system interfaces with the motronic system.
Cheers
PG