MOTOBRICK.COM

TECHNICAL MOTOBRICK WRENCHING In Remembrance of Inge K. => The Motobrick Workshop => Topic started by: TimTyler on August 09, 2015, 05:30:57 PM

Title: K75 Non-ABS Rear Brake Rotor on K75 ABS w/o ABS
Post by: TimTyler on August 09, 2015, 05:30:57 PM

Time to replace the rear brake rotor on my K75. It's down to about 3.2mm.

Currently I have an ABS rotor on because once upon a time this was an ABS bike, however the ABS is long gone.

Are the ABS and non-ABS rotors identical except for the holes for the ABS ring? Can I use the EBC non-ABS rotor (http://www.amazon.com/EBC-Brakes-MD611-Brake-Rotor/dp/B006B25Q1O)?

Title: Re: K75 Non-ABS Rear Brake Rotor on K75 ABS w/o ABS
Post by: Scott_ on August 09, 2015, 06:05:52 PM

I wouldn't know why not.
When I bought my new rear disk for my 1100, they basically sold 1 type of rear disk, I just had to mount my ABS ring from my old rotor.

YMMV.

Title: Re: K75 Non-ABS Rear Brake Rotor on K75 ABS w/o ABS
Post by: TimTyler on August 09, 2015, 08:09:37 PM

Thanks, Scott.

Title: Re: K75 Non-ABS Rear Brake Rotor on K75 ABS w/o ABS
Post by: TimTyler on August 11, 2015, 01:37:59 PM

The non-ABS rotor does fit.  :clap: