MOTOBRICK.COM

TECHNICAL MOTOBRICK WRENCHING In Remembrance of Inge K. => The Motobrick Workshop => Topic started by: gazman on July 09, 2015, 06:42:13 AM

Title: leaky injector
Post by: gazman on July 09, 2015, 06:42:13 AM

G,day all, so one of my injectors is leaking and I figure best fix it before the flames start. got the "O" rings Question is do I use rubber grease or fit them dry?

Title: Re: leaky injector
Post by: Scott_ on July 09, 2015, 06:56:00 AM

The last time I fitted a set of injectors I just did it dry.
Not sure the effects of some light weight general purpose '3in1' oil or some sewing machine type oils would have on the material.

Title: Re: leaky injector
Post by: Brad-Man on July 09, 2015, 03:54:49 PM

I use a dab of silicone grease...spread very thin and excess wiped off...