MOTOBRICK.COM
MOTOBRICK MARKETPLACE => FS WTB WTT ~ Bikes ~ Parts ~ Gear => Topic started by: pallum on June 06, 2015, 02:36:54 PM
-
So I have decided to retire my original motobrick. 1986 K75C with 140k on the clock. Worn valves are bleeding oil into the engine and I think this brick as a whole is at the end of its life. Prices will be lower than whatever I look up on ebay-- just for you fellow brickers! Free delivery to the western half of Washington state, anything else I'll ship by post office flat rate and we'll talk numbers before anything goes through. Paypal for the transfer of monies. I've been having electrical issues so anything electrical you want won't be much more than the shipping, just in case. I've been screwed on bikes before, so anything that isn't up to OEM standard won't be for sale (like the frame that I straightened myself). Just lookin' to help some brickers out before I call up the scrap man.
I transferred all the body work to my new ride, so the full get-up for a 1994 K75 Standard in bright blue just like the Brick of the Corn is available. PM me and we'll talk pictures.
Basically here is a list of things that are already sold/not for sale and if there's anything else you're looking for just shoot me a PM:
Saddle bags
Final Drive
Rear wheel
Right peg plate
Frame (bent)
Handlebars (bent)
Battery covers
Right rear turn signal
Ignition Control Unit
Hall Effect Sensor
Low Seat and hardware
Rear shock
Throttle Perch
Front Brake Master Cylinder
-
I have a 1987 K75C. Need both right and left side battery covers if functional...Cosmetic condition is not very important to me.
Thanks
Oh, and I will also shoot you a pm.
-
Evening,
I was wondering what Gen and type are the saddle bags
Thanks!
-
As far as I know, the bags are OEM and the bike is an 87 K75C...that is all I know.
-
Bags are OEM, but also still mine as my new whip didn't come with any. (You wouldn't want them with they way they're beat up anyways)
-
Selling your bars? I'd like to try the C bars on my S.
-
I have a 1987 K75 that recently started displaying intermittent symptoms of a possibly bad Hall Effect Sensor. My (admittedly shoddy and amateur) diagnostics have been inconclusive. I am therefore not excited about shelling out $400 for a new HES from euromotoelectrics only to find that it wasn't the problem. Do you have an HES that you're willing to sell cheap? :bmwsmile
-
Monkey and Muffler..................
Thanks for inquiries...not selling the handlebars and have no knowledge of the other part...
Wish I could help...
-
i will take the valve shims if you still gotts them... if you accept paypal and will mail them to tim tiorler for me...
j o
-
I have LT bars on this thing anyways, and they have a nice tweak in them (took a while to get used to that one).
-
i will take the valve shims if you still gotts them... if you accept paypal and will mail them to tim tiorler for me...
j o
I got a whole bag of them JO, if TimTiorler will be around this weekend I'll make a run down to Olympia to deliver.
-
i just wanted the 3 used exhaust shims... he aints around... he is chooting a world famous musician doing a small venue concert... hope he getts a t-shirt...
j o
-
You looking for any thickness specifically? Or just really want me to pull out the ones in there already...
-
Right rear turn signal?
-
I have a 1985 K100RS and need a few small parts that I think were the same:
Fuse box cover and gasket
Lid for underseat tool tray/brain box
Cover that screws (one screw) into back of instrument cluster and covers the two multipin plug connectors that plug in there
Have any of these you want to part with? Thanks.
-
Does the 75c have the same tank as the 75s?
-
The tank is from a 1994 K75RT. Somewhere down the line the tank structure changed to where the posts at the front of the frame with the round bumpers on them were twice as wide. If both of those posts are approximately 2 inches long then the 94 tank I have will fit. I can take a picture when I get back home on Thursday.
-
Pallum, the Hall Effect Sensor showed up in today's mail. I slapped it in and took some hot laps around the barrio. It seems to have solved the problem! :2thumbup: I just wanted to thank you and give the thread a bump.
-
Glad to help, mufflerbearings!
Monkey: I had forgotten to upload the tank mount picture until now, this is the "older" style of mount. The tank for sale only fits frames with the extended bumpers which are twice as wide as the ones shown in the picture:
(http://i.imgur.com/kx2xBofl.jpg)
-
Thanks, I'll take another look at mine.
-
Meanwhile, do you have some bushings you can sell me. they hold the box above the battery below the seat.
(http://i.imgur.com/ru3TqBU.jpg)
(http://i.imgur.com/KFjoo2J.jpg)
-
I need a dashpad. one of the mounts is missing on mine.
-
Hi, I'm looking for engine crash bars for a 95 K75. Really only need a black right one but would take both. I believe there all the same for all models except the RT .Thanks, Jeff
-
I just got my 1993 K75 standard running again after 6 years. Yay! But now have the infamous left side tank leak. So am out of commission again after only 50 miles. Booh!
Any chance your tank is still available? I really want to be on the road this summer! Thanks.
-
As a temporary fix, you can get some fuel tank repair epoxy. Is designed to be safe for use in gas tanks. So it wont dissolve or break down.
-
If I can't get a new tank soon, some epoxy is what I'll do. I'd just rather put time and money into a permanent fix if I can. Good summer riding is wasting away!
-
Especially on the Oregon coast ! Around here either your riding season is short or you have good raingear !
-
Looking for a rear brake rotor if you have one with some life left in it.
Thanks,
Marco in Seattle
-
Looking for a rear brake rotor if you have one with some life left in it.
Thanks,
Marco in Seattle
Nada, sorry nwmarco.
I saw a super slick K100RS cruising southbound on I405 today near Kirkland. Blue bike, amber driving lights, I wonder if they're around on here...
-
Pallum,
Thanks again for the great tank. After swapping the pump and such, it went right on and looks great!
Took her out for a fill up and spin. Nary a leak to be seen :2thumbup:
-
I need a rear brake master cylinder. My bike is a 95 k75 without ABS.
I need the one that is a Magura part and has a 12 stamped on the side (which means 12mm bore)
-
Do you have the instrument mount that bolts onto the steering head? Thanks.
john
-
if the k75 has the same starter relay as the k100 of the same year id be happy to take it off your hands. mine just sparked and died :musicboohoo:
-
Monkeybean,
I was missing a couple of bushings, too. I used some wine corks in their stead...either the synthetic or real cork will do. Cut 'em down, maybe a little glue and you should be good. Just like the Marines....improvise!!
-
I need an end cap for my handlebar throttle grip 1986 K100rt? Do you have one off of your K75 and would it fit?
Thanks
S
-
Do you have the windshield for sale and a picture? What is the height of it from the center top to the bottom? thanks
-
I was wonder is you still have the low seat and hardware?
-
Yes, I do. I would like to convert back to regular. Of course, the parts would all have to be in good condition and complete.
The bike I have, with the low seat option only has 6K miles and kept indoors, so seat, etc are primo.
-
I'm looking for the complete throttle control assembly. I accidentally snapped the throttle perch bracket whilst attempting to slide the assembly onto aftermarket bars. There may have been a prying device involved, but I can neither confirm, nor deny its usage...
-
I have 2 pair of side covers I am willing to part with. Prefer to send pics by email directly.