MOTOBRICK.COM

TECHNICAL MOTOBRICK WRENCHING In Remembrance of Inge K. => The Motobrick Workshop => Topic started by: pinhead on May 31, 2015, 04:30:48 AM

Title: windshields for 1985 KRt100
Post by: pinhead on May 31, 2015, 04:30:48 AM

I just got this RT100 and like it but found the windshield is too short for me.  I am 6 3 tall and I get a face full of air when I ride the bike.  Are there aftermarket windshields out there that are larger?

Title: Re: windshields for 1985 KRt100
Post by: TX brick on May 31, 2015, 06:57:07 AM

http://www.clearviewshields.com/motorcycle-windshield/bmw/k75lt-k75rt/

I have one of these on my 75RT and the vent is a nice touch.

Title: Re: windshields for 1985 KRt100
Post by: enb54 on May 31, 2015, 11:29:07 AM

Got one of these http://parabellum.com/K100RT-LT-K75RT-Windshield-System-P4.aspx and never looked back, they are out of Georgia I think, and come in various heights and either tinted or clear...

Title: Re: windshields for 1985 KRt100
Post by: pinhead on May 31, 2015, 02:28:06 PM

thanks all for those leads, I will check into them

Title: Re: windshields for 1985 KRt100
Post by: WayneDW on May 31, 2015, 02:49:43 PM

Also, consider the Laminar Lip which is placed on your existing windshield.  I have one and it works.  Drawback is that there are now two pieces of plastic to look through when you need to look at the road close to the bike.  (most of the time you are looking over it).
www.laminarlip.com