MOTOBRICK.COM

TECHNICAL MOTOBRICK WRENCHING In Remembrance of Inge K. => Project Custom Motobricks => Topic started by: betteron2wheels on May 14, 2015, 01:35:52 PM

Title: 85 K100 Backet case - turtle project
Post by: betteron2wheels on May 14, 2015, 01:35:52 PM

Hi all,

I thought I would start a build thread; I have a basket case to put back together.  It was pretty much complete when I got it but since it had almost 0 compression in a couple cylinders the head is now off and pistons are out.  I attached a fresh set of pistons and rings attached to the rods the other night and decided to take a break after I launched 2 circlips.  I'll try to post more as progress occurs.
Cheers,

Oh - turtle; thats probably going to by my pace with the project...
S.

Title: Re: 85 K100 Backet case - turtle project
Post by: betteron2wheels on May 14, 2015, 01:42:12 PM

Everyone loves pics!

Title: Re: 85 K100 Backet case - turtle project
Post by: enb54 on May 14, 2015, 02:54:30 PM

Happy wrenchin'... Looks like you've got a pretty big job ahead of you...

Title: Re: 85 K100 Backet case - turtle project
Post by: Glacial on May 14, 2015, 06:13:16 PM

Fine demonstration of the accessibility of the K-bike engine!  :bmwsmile