MOTOBRICK.COM

TECHNICAL MOTOBRICK WRENCHING In Remembrance of Inge K. => The Motobrick Workshop => Topic started by: TaosBrick on May 06, 2015, 01:32:18 PM

Title: Wrench size for larger steering head lock nut on '92 K75?
Post by: TaosBrick on May 06, 2015, 01:32:18 PM
Yup, got me some play on th' steering head, alrighty. This kinda ch!t always happens when on the road, hundreds or even thousands of miles away from yer shop, right?
  Anyhey, what size wrench do I need for that big nut on top of the upper brace? I wanna get me to the nearest NAPA or wherever, buy a wrench and Deal With This Thing.
Title: Re: Wrench size for larger steering head lock nut on '92 K75?
Post by: TaosBob101 on May 06, 2015, 03:09:23 PM
 Is it in this pdf ??????????????

http://www.motobrick.com/index.php/topic,2252.0.html (http://www.motobrick.com/index.php/topic,2252.0.html)



Section 32 steering over in the card file Johnny re-did
Title: Re: Wrench size for larger steering head lock nut on '92 K75?
Post by: TaosBrick on May 06, 2015, 03:42:17 PM
Problem solved. Friendly neighborhood Auto Zone guy mic-ed it, 32mm, we tightened it up, no mo slop. Yay!
Title: Re: Wrench size for larger steering head lock nut on '92 K75?
Post by: TaosBob101 on May 06, 2015, 04:01:10 PM
  Now I know what size.......
Title: Re: Wrench size for larger steering head lock nut on '92 K75?
Post by: johnny on May 06, 2015, 04:32:25 PM
greetings...

itsa 32mm..

j o
Title: Re: Wrench size for larger steering head lock nut on '92 K75?
Post by: johnny on May 06, 2015, 04:37:34 PM
greetings...

the 1st thing i would do is replace the fuel filter... reset the 4pin under tank fuel pump connector... reset the jetronic connector...

see how it goes...

j o
Title: Re: Wrench size for larger steering head lock nut on '92 K75?
Post by: TaosBrick on May 06, 2015, 04:45:52 PM
Fuel filter replaced, no change in symptoms - that were on my other post ;-)
Title: Re: Wrench size for larger steering head lock nut on '92 K75?
Post by: johnny on May 06, 2015, 05:41:40 PM
some will say leaking rubber hoses... some will say whack valves...

this same thing happened to me on the eleven hundert motobrick a ways back... it was the throttle positioning sensor adjustment...

j o