MOTOBRICK.COM
TECHNICAL MOTOBRICK WRENCHING In Remembrance of Inge K. => The Motobrick Workshop => Topic started by: PiotrK100 on May 05, 2015, 06:43:16 AM
-
Hi
Just today I assembled my brick together…almost. Some missing parts like a seat but all in progress...
Need help regarding my speedo. I connect all as it was described but in fact nothing works:
http://www.k100-forum.com/t8232-electrical-trouble-mounting-aftermarket-digital-speedo
- Rpm are between 3000-4000 and in fact shows nothing, stays in that position no matter acceleration
- Fuel gauge blinking without showing nothing, I did a change in a tank: http://www.k100-forum.com/t9265-messing-with-the-in-tank-fuel-sender
I did all connection according to the post on motobrick.
I did not connect the speed sensor as that is a bit challange: first of all what for are two magnets intead of one? Some pictures of that speedo shows one magnet and some two. Still thinking how to screw this magnets to the wheel!!! and how to mount probe (hall). Any suggestion will be welcomed.
Also flat time circuference I have no idea what to change there. I must be stupid :riding: