MOTOBRICK.COM

TECHNICAL MOTOBRICK WRENCHING In Remembrance of Inge K. => The Motobrick Workshop => Topic started by: Gio on April 23, 2015, 11:25:14 AM

Title: Will dual bench (high) seat from K75 fit on a K1100LT ??
Post by: Gio on April 23, 2015, 11:25:14 AM

Hello comrades,

I have a standard factory dual bench (high) seat (with hardware) from my '94 K75s for sale (listed here and a couple of other places)and got an enquiry from a fellow bricker (on another forum) asking if it would fit his '96 K1100LT? I know my seat will fit a K75/100 but not sure about the 1100 - and wouldn't want to see him buy if it won't fit.

Anyone know the answer?

Gio

Title: Re: Will dual bench (high) seat from K75 fit on a K1100LT ??
Post by: johnny on April 23, 2015, 02:53:10 PM

greetings...

unmolested... should fitt...

id give him the part number and ask him to doo his doo dillergence... cause i aints taking it back...

j o

Title: Re: Will dual bench (high) seat from K75 fit on a K1100LT ??
Post by: Gio on April 23, 2015, 02:58:15 PM

Thanks johnny - he seems to think it should also, but will do as you suggest.

Cheers!

Gio

Title: Re: Will dual bench (high) seat from K75 fit on a K1100LT ??
Post by: Gio on April 23, 2015, 03:41:28 PM

Part #(?) stamped on underside is 2323341 4835 but was unable to find this on realoem.com ??

Title: Re: Will dual bench (high) seat from K75 fit on a K1100LT ??
Post by: johnny on April 23, 2015, 05:11:45 PM

greetings...

is that seat heated...

j o

Title: Re: Will dual bench (high) seat from K75 fit on a K1100LT ??
Post by: Gio on April 23, 2015, 05:22:32 PM

Only when sliding from side to side too hard ...! No, seat is not heated (at least to the best of my knowledge) ...

Gio

Title: Re: Will dual bench (high) seat from K75 fit on a K1100LT ??
Post by: johnny on April 23, 2015, 07:35:23 PM

is it leather vinyl or other...

j o

Title: Re: Will dual bench (high) seat from K75 fit on a K1100LT ??
Post by: Gio on April 23, 2015, 10:50:56 PM

It's the standard grey vinyl johnny - must be made of good stuff as it looks like it just came out the factory!

Title: Re: Will dual bench (high) seat from K75 fit on a K1100LT ??
Post by: johnny on April 24, 2015, 07:37:26 AM

under the vinyl cover is there foam or wood...

j o

Title: Re: Will dual bench (high) seat from K75 fit on a K1100LT ??
Post by: Gio on April 24, 2015, 08:58:39 AM

With your great sense of humour johnny - sometimes it's hard to know ... but I have no idea (underside of seat is well fastened down and would not want to disturb that) - based on the feel I would say hard(ish) foam ..?

Gio

Title: Re: Will dual bench (high) seat from K75 fit on a K1100LT ??
Post by: johnny on April 24, 2015, 09:05:02 AM

rodger that...

if its as hard as a 2 x 6 its prolly oem foam...

now we have to confirm its condition that the photos caint demonstrate...

standing next to the moto... does it smell of urine standing... nose 2 feet away... nose 1 foot away... you getts the idea... all the down to nose on seat...

lemme know...

j o