MOTOBRICK.COM

TECHNICAL MOTOBRICK WRENCHING In Remembrance of Inge K. => The Motobrick Workshop => Topic started by: 3DdesignsK75S on April 21, 2015, 03:40:08 AM

Title: Sticking K75s light switch
Post by: 3DdesignsK75S on April 21, 2015, 03:40:08 AM

Is there a way to clean, lube etc. to get the left hand side high beam low beam switch working? Any btdt?

Title: Re: Sticking K75s light switch
Post by: Motorhobo on April 21, 2015, 06:37:03 AM

+1 good question - I have a switch that sometimes blacks out the lights. Toggling it a couple times gets it back working, but compared to the other K75 this switch is definitely in need of service. This bike was a zombie for three years which probably didn't help the switches.

I found this:

http://www.motobrick.com/index.php/topic,5961.msg39019.html#msg39019

http://www.motobrick.com/index.php/topic,6299.msg42238.html#msg42238

If you don't have e headlight relay mentioned in the second link, it comes recommended -- I put it in last year and really improved the headlight performance, and probably prevented further damage to the switch.

Title: Re: Sticking K75s light switch
Post by: 3DdesignsK75S on April 21, 2015, 01:30:30 PM

Thanks for the links. I'll investigate further to see what is up with mine exactly.

Title: Re: Sticking K75s light switch
Post by: rbm on April 21, 2015, 08:36:12 PM

http://technik.flyingbrick.de/images/f/f9/61_lenker_rechts.pdf

Use Google to translate.

Title: Re: Sticking K75s light switch
Post by: 3DdesignsK75S on April 22, 2015, 02:53:44 AM

Sehr gut! Vielen Dank.