MOTOBRICK.COM

MOTOBRICK MARKETPLACE => FS WTB WTT ~ Bikes ~ Parts ~ Gear => Topic started by: 3DdesignsK75S on April 04, 2015, 02:14:40 PM

Title: WTB rear brake master cylinder (not the ABS cylinder)
Post by: 3DdesignsK75S on April 04, 2015, 02:14:40 PM

Bought a rebuild kit from beemerboneyard, but as it turns out the master cylinder is no good either. Anybody has one for sale???

Title: Re: WTB rear brake master cylinder (not the ABS cylinder)
Post by: rbm on April 04, 2015, 03:33:30 PM

12mm or 13mm?  I think I have a 13mm rear master that is rebuildable in my stash.

Title: Re: WTB rear brake master cylinder (not the ABS cylinder)
Post by: 3DdesignsK75S on April 04, 2015, 03:37:48 PM

sorry. 12mm

Title: Re: WTB rear brake master cylinder (not the ABS cylinder)
Post by: The Mighty Gryphon on April 04, 2015, 10:53:47 PM

Do a search for stainless master cylinder sleeves/sleeving.  There is an outfit in Cali that does them pretty reasonably.  About $150 which is about what you'd pay for a good used master cylinder. 

Stainless will last forever.

Title: Re: WTB rear brake master cylinder (not the ABS cylinder)
Post by: 3DdesignsK75S on April 04, 2015, 11:17:29 PM

Thanks for the info. I actually found a place in UK where I can get them brand new including shipping for about 160. I also found some used ones on ebay in Germany. Non in the US.