MOTOBRICK.COM

TECHNICAL MOTOBRICK WRENCHING In Remembrance of Inge K. => The Motobrick Workshop => Topic started by: beemuker on March 28, 2015, 11:19:23 AM

Title: gluing extenda fender
Post by: beemuker on March 28, 2015, 11:19:23 AM

so I bought an extenda fender to keep the dirt and mud off my lower faring[K75s]. Has anyone glued it on using epoxy. ? I hate the idea of drilling and screwing into that beautiful painted fender.

Title: Re: gluing extenda fender
Post by: richarddacat on March 28, 2015, 11:21:13 AM

Yes, did the same on my FJR and both holding up well.

Just clean the surfaces very well, clamp and give plenty of time to dry.

Title: Re: gluing extenda fender
Post by: TaosBob101 on June 08, 2015, 10:25:46 AM

 What kind and brand of epoxy was used ?

Title: Re: gluing extenda fender
Post by: beemuker on June 08, 2015, 10:57:31 AM

I used System 3 because I had some left over from building a kayak. any good 2 part should work.

Title: Re: gluing extenda fender
Post by: Elipten on June 08, 2015, 01:50:52 PM

I use 3m marine adhesive.  Not an epoxy.