MOTOBRICK.COM
TECHNICAL MOTOBRICK WRENCHING In Remembrance of Inge K. => The Motobrick Workshop => Topic started by: ludwig on September 15, 2014, 01:18:52 PM
-
it's a 94 k75s
not leaking now, but it looks like it is on it's way to developing one. i use the bike for weekend trips and touring, and don't want to have to worry about a potential leak waiting to happen.
i've taken all the necessary steps to prevent further corrosion.
being a newbie i am unlearned in what is "acceptable" or not.
thx
-
if it's not weeping through yet you're probably ok. What I'd do is empty the tank, clean up the corrosion a little and put some Permatex gas tank sealer over it. I used the stuff on the outside of my tank after it corroded through and it's held up for years.