MOTOBRICK.COM

TECHNICAL MOTOBRICK WRENCHING In Remembrance of Inge K. => The Motobrick Workshop => Topic started by: jmarcanio on July 28, 2014, 05:12:24 PM

Title: Horn stuck on
Post by: jmarcanio on July 28, 2014, 05:12:24 PM

Hello all, I have an '87 k75 and recently disassembled the light switch to clean the contacts of the high beam switch. To do that you have to remove all of the buttons including the horn button. After reassembly the horn is now stuck on. This whole procedure was completed in about 30 minutes without touching any other components! Any thoughts on what may have caused this? 

Title: Re: Horn stuck on
Post by: Inge K. on July 28, 2014, 06:58:34 PM

The contacts at the horn button is shorted to ground.