MOTOBRICK.COM
TECHNICAL MOTOBRICK WRENCHING In Remembrance of Inge K. => The Motobrick Workshop => Topic started by: Justdirt on July 20, 2014, 12:43:46 PM
-
:yow I reinstalled my Instrument Panel. Everything is working correctly except the gear indicator. First Gear is now showing a " 5". I would appreciate any suggestions on what I can do to correct the problem.
-
You have probably bad connection at the yellow/white wire at pin #2 at the cluster connector.
Then you would have strange numbers in all gears exept #4.
-
You have probably bad connection at the yellow/white wire at pin #2 at the cluster connector.
Then you would have strange numbers in all gears exept #4.
Thank you. I will pull the cluster connector and inspect.
-
The problem could of course be elsewhere in this circuit, but most likely at the cluster connector as you
just had it reinstalled.
The yellow/white wire should be connected to ground (at the gearbox switch) in all gears (also neutral)
exept fourth and fifth.
-
You have probably bad connection at the yellow/white wire at pin #2 at the cluster connector.
Then you would have strange numbers in all gears exept #4.
Hello Norway, home of the World Chess Champion Magnus Carlson! Thank you for the help, my cluster is repaired. Have a great week.
-
Amazing...how could anyone know so much about anything?
Sorry...this post has so informational value except to marvel at Inge's infinite Kbike knowledge.
-
:2thumbup:
...except to marvel at Inge's infinite Kbike knowledge.
-
I've said it before and I'll say it again, Inge is a machine and not a person! :dunno2:
Don't let the cute looking avatar fool you...
-
.