MOTOBRICK.COM

TECHNICAL MOTOBRICK WRENCHING In Remembrance of Inge K. => The Motobrick Workshop => Topic started by: Tom Menard on June 09, 2014, 07:48:37 PM

Title: Fuel filter replacement
Post by: Tom Menard on June 09, 2014, 07:48:37 PM

Do I need to remove gas tank on 1988 k100 to replace fuel filter?

Title: Re: Fuel filter replacement
Post by: johnny on June 09, 2014, 07:53:33 PM

yawl...

nope... open the fuel cap... remove the 4 bung screws under the cap... lift the whole fuel bung off the tank... reach in there and loosen the filter hose clamps... pull it out taking note of the direction arrow...

j o

Title: Re: Fuel filter replacement
Post by: Tom Menard on June 09, 2014, 08:18:34 PM

Thanks johnny I'm smarter then I was ten minutes ago

Title: Re: Fuel filter replacement
Post by: Chaos on June 09, 2014, 08:50:12 PM

It's also less messy if you have a near empty tank!

Title: Re: Fuel filter replacement
Post by: Inge K. on June 09, 2014, 09:01:37 PM

A small ratchet and a long 7mm socket (or short extension) also makes life easier.