MOTOBRICK.COM

TECHNICAL MOTOBRICK WRENCHING In Remembrance of Inge K. => The Motobrick Workshop => Topic started by: racinrich on June 02, 2014, 12:17:08 PM

Title: tank bag installation k1100lt
Post by: racinrich on June 02, 2014, 12:17:08 PM

so I got this tang bag from tarik , nice condition,its the right base for k1100lt/rs but it does not hook well to bottom sides of tank,is there supposed to be rubber on clip like the front clip has ?  I have the knee pads on the tank. pics online show tank bag mounted with or without knee pads. Do I bend the clips or add rubber or both ???

Title: Re: tank bag installation k1100lt
Post by: mystic red on June 02, 2014, 01:01:11 PM

Do you have the two clips that bolt to the bike just under the tank?

Title: Re: tank bag installation k1100lt
Post by: David_S_Walker on June 02, 2014, 01:54:19 PM

Hello,

And the part numbers are:71602304456 & 71602304457 and are still available from BMW for around $12.50.

Best regards,

David

Title: Re: tank bag installation k1100lt
Post by: johnny on June 02, 2014, 01:59:44 PM

greetings racinrich...

click here for the detail... (http://www.motobrick.com/index.php?topic=3461.0)

(http://i278.photobucket.com/albums/kk91/electro_handyman/Bike%20Tech/DSCF2769.jpg)

j o

Title: Re: tank bag installation k1100lt
Post by: racinrich on June 02, 2014, 04:00:19 PM

that explains everything !!! tanks  :hehehe :hehehe

Title: Re: tank bag installation k1100lt
Post by: johnny on June 02, 2014, 04:16:40 PM

dont tank me... tank scott_ for resurrecting that lieberry deal...

j o

Title: Re: tank bag installation k1100lt
Post by: Scott_ on June 03, 2014, 07:02:30 AM

Quote from: johnny on June 02, 2014, 04:16:40 PM

dont tank me... tank scott_ for resurrecting that lieberry deal...

j o

I thought that picture looked familiar....