MOTOBRICK.COM

TECHNICAL MOTOBRICK WRENCHING In Remembrance of Inge K. => The Motobrick Workshop => Topic started by: Jbuffalo on March 11, 2014, 07:00:46 AM

Title: K75s 1987-a few more questions-Heated Grips
Post by: Jbuffalo on March 11, 2014, 07:00:46 AM

I am waiting for parts before I start up the bike.  Now fixing the heated grip(left grip is the problem). The left grip has the Bmw wiring through the bar ends and I am going to replace the thin resistance wiring.  The left grip cover is cut and I will have to get a new one.  Were these grips grey or black in color?  I do not want to remove the Right Grip because of the possibility of destroying the thin heat wire but I would like them to match. I would buy the whole unit if it would match. Were do I get a matching left grip that is for heated grips that will match the right grip which is now a grey color?  thanks Jim

Title: Re: K75s 1987-a few more questions-Heated Grips
Post by: Inge K. on March 11, 2014, 08:23:08 AM

Quote from: Jbuffalo on March 11, 2014, 07:00:46 AM

Were these grips grey or black in color?

Grey.

Title: Re: K75s 1987-a few more questions-Heated Grips
Post by: mack75 on March 13, 2014, 04:34:56 PM

You can save the original grip if in good condition by using a high pressure air line to blow the grip off the bar, takes a bit of trying but it works.
But check the connection from the switch first before going for the bar windings.

Title: Re: K75s 1987-a few more questions-Heated Grips
Post by: GasStation on March 15, 2014, 04:17:18 PM

I purchased heated grips last year for K75S and the kit came with grey handles.