MOTOBRICK.COM
TECHNICAL MOTOBRICK WRENCHING In Remembrance of Inge K. => Project Custom Motobricks => Topic started by: Shoganai on February 27, 2014, 11:01:50 AM
-
Well the reason I couldn't find the pictures of this mini project was that in my rush to get the bike ready, I didn't take any.
Here is the oil caddy I built.
I bought two of these. Powermadd Polaris GEN II Chassis Oil Caddy.
(Well the actual ones I bought did not have that large side plate and did have the black bungee strap to hold the oil in the caddy.)
(http://shoganai.smugmug.com/Motorcycles/Blue-Streak/i-23bvS3G/0/XL/Oil%20Caddy-XL.jpg)
This is the exact one I bought. PowerMadd 74805 Spare Oil Storage for Polaris Gen II
(http://shoganai.smugmug.com/Motorcycles/Blue-Streak/i-Gsqgmrh/0/O/Oil%20Caddy%203.jpg)
And a bar of 1" x 4" aluminum stock.
I mount it in place of the right rear foot peg and was able to use the OEM bolt. I put it there for two reasons. One, it was closest to the oil fill on the K11 and two, I didn't give up any premium storage location.
(http://shoganai.smugmug.com/Motorcycles/Blue-Streak/i-pnK2zXw/0/XL/DSCF1149-XL.jpg)
(http://shoganai.smugmug.com/Motorcycles/Blue-Streak/i-TwVxzvz/0/X2/DSCF1149%20-%201-X2.jpg)
(http://shoganai.smugmug.com/Motorcycles/Blue-Streak/i-GqpFsxH/0/X2/DSCF1152%20-%201-X2.jpg)
(http://shoganai.smugmug.com/Motorcycles/Blue-Streak/i-gxF85p9/0/X2/DSCF1151-X2.jpg)
(http://shoganai.smugmug.com/Motorcycles/Blue-Streak/i-sFThrN2/0/X2/DSCF1152-X2.jpg)
(http://shoganai.smugmug.com/Motorcycles/Blue-Streak/i-6R9W3Sv/0/X2/DSCF1154-X2.jpg)
(http://shoganai.smugmug.com/Motorcycles/Blue-Streak/i-4ttzGBC/0/XL/Oil%20Caddy%202-XL.jpg)
(http://shoganai.smugmug.com/Motorcycles/Blue-Streak/i-4PQMMTj/0/XL/DSCF1149%20-%202-XL.jpg)
It worked perfectly!
.