MOTOBRICK.COM

TECHNICAL MOTOBRICK WRENCHING In Remembrance of Inge K. => The Motobrick Workshop => Topic started by: Scott_ on September 21, 2013, 10:08:35 PM

Title: K Bike Headlight Relays ~ author drake smith
Post by: Scott_ on September 21, 2013, 10:08:35 PM

K Bike Headlight Relays ~ author drake smith (http://classickbikes.com/ckb.tech/0.ckb.tech.files/hl.relays/hl.relays.htm)

Title: Re: K Bike Headlight Relays ~ author drake smith
Post by: frankenduck on September 23, 2024, 05:15:07 PM

I recently updated my headlight relay page. It now contains an alternate way to wire headlight relays so that even if your headlight Hi/Lo switch completely fails you will always have at least the low beam working.

(http://www.kbikeparts.com/classickbikes.com/ckb.tech/0.ckb.tech.files/hl.relays/Alt.Headlight.Relays.Low.Beam.V2.02.jpg)

I also like using micro (half-sized) relays because they take up less room.

(https://i.ebayimg.com/images/g/bOQAAOSwyOVdjG~F/s-l1600.webp)

(http://www.kbikeparts.com/classickbikes.com/ckb.tech/0.ckb.tech.files/hl.relays/Alt.Headlight.Relays.Low.Beam.V2.02(Micro)1.jpg)


Link to my headlight relay page:
http://www.kbikeparts.com/classickbikes.com/ckb.tech/0.ckb.tech.files/hl.relays/hl.relays.htm