MOTOBRICK.COM
MOTOBRICK MARKETPLACE => FS WTB WTT ~ Bikes ~ Parts ~ Gear => Topic started by: allenblakee on September 08, 2013, 11:15:50 AM
-
Hey all-
I bought this bad-boy from eBay, but didn't read the description close enough, and it won't fit my '94. It's in great shape with a back rest...if your K bike as the latch for the seat at the front (between gas tank and seat) this might be the saddle for you.
No hardware (you just use the H/W from your current seat)...Let me know if you're interested, I can provide other pictures as well....
Paypal preferred for payment. Will pay standard (USPS) shipping in the continental states
http://www.ebay.com/itm/261269034586?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649 (http://www.ebay.com/itm/261269034586?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649)
Thanks!
-
i cant tell by looking at the tiny photos on my tiny phone... butts im thinking this may be the elusive corbin low seat folks here are in search of...
j o
-
Hmm elusive, eh?
How can I remove the mystery? I can't read the model as the tag is faded, but I could take some measurements.
-
I have confirmed that this is in fact the "low" edition of the saddle. It has had some additional foam added to the front of the seat, but is still in great shape.
-
Can I ask how it is that adding some foam can make it a "low" seat?
-
"LOW" would be in reference to compared to a stock seat. So a LOW Corbin with a little extra foam could still easily be lower than a stock seat. Plus when he says foam added to the front of the seat, I imagine he means in the nut sack area.
-
Yes sorry to be confusing on the "low" point. This saddle is different from the stick saddle and has different latch and hinge locations and will only work If you did the "low" conversion on your K bike.
And yes, the crotch area is where it was added.
-
Seat is on its way back to the seller. Thanks for the help identifying, etc.