MOTOBRICK.COM

TECHNICAL MOTOBRICK WRENCHING In Remembrance of Inge K. => The Motobrick Workshop => Topic started by: hammick on August 12, 2013, 10:19:08 PM

Title: K75 standard radiator fairing help please
Post by: hammick on August 12, 2013, 10:19:08 PM

My bike didn't come with a radiator fairing.  I bought one used and it arrived today.  Installed fine.  I'm wondering if there is supposed to be some type of seal to fill the gap between the fairing and the tank or if my is as it should be.  Photo below.  I'm also needing help to mount the front brake line bracket.  A photo would be great.  My bike came with an R100rs fairing and I'm assuming my front brake line has some extra gromets that I need to remove.  Thanks.

(https://lh3.googleusercontent.com/-CfmK9aaH16Y/UgmWo-KtgcI/AAAAAAAAAxA/OKnk3wNw83k/w913-h685-no/photo.JPG)

Title: Re: K75 standard radiator fairing help please
Post by: Oma Aika on August 14, 2013, 02:06:40 PM

Mine has a similar gap and others that I've seen have it too, so I think that's the way it is.

Title: Re: K75 standard radiator fairing help please
Post by: hammick on August 14, 2013, 09:17:43 PM

Thanks

Title: Re: K75 standard radiator fairing help please
Post by: cmichael on August 15, 2013, 02:30:46 AM

Did you use new rubber gromets?

Title: Re: K75 standard radiator fairing help please
Post by: hammick on August 15, 2013, 09:28:57 AM

Quote from: cmichael on August 15, 2013, 02:30:46 AM

Did you use new rubber gromets?

Just silicone. They are tight though. Probably should