MOTOBRICK.COM

TECHNICAL MOTOBRICK WRENCHING In Remembrance of Inge K. => The Motobrick Workshop => Topic started by: otto59 on July 01, 2013, 10:02:33 AM

Title: Swingarm bearings
Post by: otto59 on July 01, 2013, 10:02:33 AM

Has anyone used the 32203A without any problems on a K100?

Title: Re: Swingarm bearings
Post by: wmax351 on July 02, 2013, 03:38:35 AM

The bearings are the same part number between all the K bikes. They should be fine.

Title: Re: Swingarm bearings
Post by: otto59 on July 02, 2013, 03:34:01 PM

This bearing is one quarter of a millimeter thicker than the BMW bearing. Not sure if this would make a big difference?

Title: Re: Swingarm bearings
Post by: wmax351 on July 02, 2013, 07:10:04 PM

Quote from: otto59 on July 02, 2013, 03:34:01 PM

This bearing is one quarter of a millimeter thicker than the BMW bearing. Not sure if this would make a big difference?

The dimensions work out to be the same. Forgot exactly why that is, but it is fine.