MOTOBRICK.COM

TECHNICAL MOTOBRICK WRENCHING In Remembrance of Inge K. => The Motobrick Workshop => Topic started by: argent brick on April 27, 2013, 02:58:17 AM

Title: Oil Sight Glass Replacement- K75
Post by: argent brick on April 27, 2013, 02:58:17 AM

Hi Everyone,

How hard is it to replace the oil sight glass on a standard K75?

Title: Re: Oil Sight Glass Replacement- K75
Post by: Chaos on April 27, 2013, 09:15:29 AM

pretty easy, it's a press fit.  Drill a 1/8 inch hole in the old one, partly screw in a big screw and use that to pull or lever out the old sight glass.  Clean the hole, no sealer necessary, carefully tap in the new one.