MOTOBRICK.COM

TECHNICAL MOTOBRICK WRENCHING In Remembrance of Inge K. => The Motobrick Workshop => Topic started by: Fossil on April 26, 2013, 04:18:45 PM

Title: Leaking tank
Post by: Fossil on April 26, 2013, 04:18:45 PM

Found crud in tank and cleaned it out. While doing this I discovered blistered paint at bottom edge of tank and under that I found a previous repair. I want to use a sealant (epoxy?) that you coat the inside of tank with. Does anyone have a suggestion which product to use. I don't want to cause any restriction around the pump baffle. Thanks

Title: Re: Leaking tank
Post by: tg4360 on April 27, 2013, 02:28:05 PM

Caswell is your friend.

I did the bottom of and up the sides of my LT tank.   The layer is about a quarter inch thick on the bottom of the tank.

Worked well.

Title: Re: Leaking tank
Post by: Fossil on April 28, 2013, 02:22:38 PM

Thanks for the tip. I'll give them a call tomorrow. This brick may fly before too long.