MOTOBRICK.COM

TECHNICAL MOTOBRICK WRENCHING In Remembrance of Inge K. => The Motobrick Workshop => Topic started by: nortonbrian on February 26, 2013, 07:52:33 PM

Title: switch cluster
Post by: nortonbrian on February 26, 2013, 07:52:33 PM
my recently aquired 1992 K75 right handlebar switch cluster has a large yellow three position switch. Is this a European spec item? It doesnt appear to control the lighting, I will have to trace the wires and see what is hooked up to, if anything.





Title: Re: switch cluster
Post by: frankenduck on February 26, 2013, 08:08:23 PM
From the factory is is/was a "Euro" headlight switch that turns the parking/ headlight on like in a car.

People have been known to rewire them to control driving lights and other functions so a wire trace is in order to find out what's up.
Title: Re: switch cluster
Post by: Diveschool on February 26, 2013, 09:41:25 PM
Top = activating high light
Middle default
Low= flashing high light
Title: Re: switch cluster
Post by: frankenduck on February 26, 2013, 10:22:02 PM
Top = activating high light
Middle default
Low= flashing high light

RIGHT handlebar switch.

(http://i82.photobucket.com/albums/j246/smithduck/k75f_old/k75f_130.jpg)
Title: Re: switch cluster
Post by: Qdude on February 28, 2013, 01:36:05 AM

I had a bike with a switch like that on it that did nothing and I would just flip it now and then.

Until a Lady in Connecticut called me and told me to cut it out.