MOTOBRICK.COM

TECHNICAL MOTOBRICK WRENCHING In Remembrance of Inge K. => The Motobrick Workshop => Topic started by: argent brick on January 21, 2013, 05:53:07 PM

Title: Bar Pad Change
Post by: argent brick on January 21, 2013, 05:53:07 PM

Is there any reason that I can't put the key and switch pad off of a K75S onto a K75 standard?  I am hate my keys getting in the way of my switches.

Title: Re: Bar Pad Change
Post by: Inge K. on January 21, 2013, 07:14:05 PM

Easiest solution would be to remove the other keys, your ignition switch lock barrel would also appreciate it.

Inge K.

Title: Re: Bar Pad Change
Post by: Chaos on January 21, 2013, 07:58:56 PM

not sure, but I don't think the S pad works with C bars.  When I had C bars on my S I used a C pad, but it was so long ago I forget the particulars. It may be the C bars curve up too much for the S pad to fit.