MOTOBRICK.COM

TECHNICAL MOTOBRICK WRENCHING In Remembrance of Inge K. => The Motobrick Workshop => Topic started by: lhead on November 05, 2012, 07:57:36 AM

Title: Exhaust transmission mount question
Post by: lhead on November 05, 2012, 07:57:36 AM

Good Morning,
After a protracted repair period, final assembly is taking place on the 1100rs. The exhaust mounts to the transmission area under the right side according to the fiche diagram I've looked at. My bike didn't have the trans mount L shaped bracket when I took it apart. There's a bolt, washer and a large hollow hex nut that was attached to the exhaust, but it didn't bolt to anything.

Could someone provide me with a description an/or a picture of exactly how and where the bracket attaches to the underside of the bike?

Thanks.

Title: Re: Exhaust transmission mount question
Post by: Inge K. on November 05, 2012, 09:55:24 AM

The L shaped bracket is mounted at rear right screw at the frame/bridge for the center and side stand.

Inge K.

Title: Re: Exhaust transmission mount question
Post by: lhead on November 05, 2012, 10:08:58 AM

Thanks!

Title: Re: Exhaust transmission mount question
Post by: Niemand on November 15, 2012, 01:02:43 PM

You might not need this any longer, but here are some pictures none the less:

*poof*