MOTOBRICK.COM

TECHNICAL MOTOBRICK WRENCHING In Remembrance of Inge K. => The Motobrick Workshop => Topic started by: moynistan on September 16, 2012, 08:31:03 PM

Title: Hi and Lo beam good, but no Hi flash...K100RS4V
Post by: moynistan on September 16, 2012, 08:31:03 PM

I disassmbled the switchgear per Lieberry instruction.  Everything is clean, and wiring/soldering looks great. I can see what is happening when I move the switch and cannot understand why the Hi beam won't flash... :dunno2:

Any takers?

Title: Re: Hi and Lo beam good, but no Hi flash...K100RS4V
Post by: Inge K. on September 16, 2012, 08:37:39 PM

Do you got power on the green/blue wire? If not, check the connector under the tank.

Inge K.

Title: Re: Hi and Lo beam good, but no Hi flash...K100RS4V
Post by: moynistan on September 17, 2012, 12:24:34 PM

Thanks, obviously I'm pretty limited in my understanding of electrical matters, I appreciate your patience with a noob.

SOLVED:  missing micro screw on hi low beam switch replaced and cleaned contacts, reconnected and good to go.