MOTOBRICK.COM

TECHNICAL MOTOBRICK WRENCHING In Remembrance of Inge K. => The Motobrick Workshop => Topic started by: K75RT Keith on September 04, 2012, 11:25:54 AM

Title: K75RT Front Fork Height
Post by: K75RT Keith on September 04, 2012, 11:25:54 AM

Would someone with a K75RT please advise how much fork tube should there be above the upper triple tree clamp and the end cap.

Title: Re: K75RT Front Fork Height
Post by: TimTyler on September 04, 2012, 11:45:18 AM

Mine is flush with the caps.

If you raise the tubes a little higher it will lower the bike a little, and some claim handling is improved because trail is increased. I had it like that for a short while and don't remember much of a difference.