MOTOBRICK.COM

TECHNICAL MOTOBRICK WRENCHING In Remembrance of Inge K. => The Motobrick Workshop => Topic started by: Gubro30 on August 30, 2012, 02:14:15 PM

Title: Synch'ing the TBs with a single dial vacuum gauge?
Post by: Gubro30 on August 30, 2012, 02:14:15 PM

Can I simply proceed by adjusting #2 and #3 to equal #1's reading?

Thanks!

Title: Re: Synch'ing the TBs with a single dial vacuum gauge?
Post by: frankenduck on August 30, 2012, 02:31:33 PM

If it's an accurate enough gauge you could probably get close.

You'll want to T in the vacuum line off of the #3 to the FPR for the best results.

Stop by if you're ever riding through Seattle and you can use my Carbtune.

Title: Re: Synch'ing the TBs with a single dial vacuum gauge?
Post by: argent brick on August 30, 2012, 03:43:49 PM

what model Carbtune do you recommend for someone to buy?  Are there other mfg. that make the same type of tool?

Title: Synch'ing the TBs with a single dial vacuum gauge?
Post by: Gubro30 on August 30, 2012, 03:58:25 PM

Thanks Duck! That's very nice of you!

I'm roughy 6000km away but you never know :)

Cheers

Title: Re: Synch'ing the TBs with a single dial vacuum gauge?
Post by: frankenduck on August 30, 2012, 04:16:32 PM

Quote from: Gubro30 on August 30, 2012, 03:58:25 PM

Thanks Duck! That's very nice of you!

I'm roughy 6000km away but you never know :)

Cheers

Doh! I wasn't paying attention and  thought you were someone else. :giggles

Title: Re: Synch'ing the TBs with a single dial vacuum gauge?
Post by: wmax351 on August 30, 2012, 07:36:12 PM

You should be able to get a cheap mercury manometer. Maybe 30 bucks.