MOTOBRICK.COM

TECHNICAL MOTOBRICK WRENCHING In Remembrance of Inge K. => The Motobrick Workshop => Topic started by: argent brick on July 29, 2012, 11:48:40 AM

Title: OEM tankbag
Post by: argent brick on July 29, 2012, 11:48:40 AM

Question for y'all

Is a factory BMW tankbag the same for a K1100 and a K100?
I assume that the base is different, but is it the same bag or are they interchangeable?

Title: OEM tankbag
Post by: Duc750 on July 29, 2012, 01:04:29 PM

Sort of, I think the k100 fits an 11 but not the other way round

Title: Re: OEM tankbag
Post by: Inge K. on July 29, 2012, 01:39:16 PM

It was four different systems used during the years, Multivario, Multivario II, Multivario III, Multivario 95.
Tankbag and baseplate within the same system fits together, all systems got different zippers.

For the the baseplate used on the K100, all systems was available.
For the the baseplate used on the (K1) K1100, (II) III and 95 was available.

Multivario was the only one with a small compartement on the top of the bag, midsection of the bag did
have the same colour as the bag, blue/grey.

Multivario II was grey, with a red midsection and with a removable small compartement inside the top section.

Multivario III was all black with a yellow liner on top of the bag and with a removable small compartement inside the top section.

Multivario 95 was all black.

Inge K.

Title: Re: OEM tankbag
Post by: frankenduck on July 30, 2012, 07:03:34 PM

And the various models may or may not have different (incompatible) zippers.