MOTOBRICK.COM

MOTOBRICK MARKETPLACE => FS WTB WTT ~ Bikes ~ Parts ~ Gear => Topic started by: crazychester on July 19, 2012, 12:37:23 PM

Title: 1988 K100RS SE Temp Gauge and gauge wiring harness needed
Post by: crazychester on July 19, 2012, 12:37:23 PM

Anyone have a temp gauge and gauge wiring harness for a 1988 K100RS? I believe the harness for this part of the bike feeds the fuel gauge and the temp gauge. I need the temp gauge and the wiring harness that goes to it. FYI, the part numbers for these parts are as follows:

62 13 2 305 069    TEMPERATURE GAUGE
61 12 1 459 488    WIRING ADDITIONAL INSTRUMENTS

Thanks.

Martin (in St. Louis)

Title: Re: 1988 K100RS SE Temp Gauge and gauge wiring harness needed
Post by: robleyd on July 19, 2012, 06:38:32 PM

Have a look at Duck's site - http://www.kbikeparts.com/ (http://www.kbikeparts.com/)

Title: Re: 1988 K100RS SE Temp Gauge and gauge wiring harness needed
Post by: frankenduck on July 19, 2012, 08:17:37 PM

Just wire it up yourself.  It's very easy.

Brown - Brown
Gray/Blue - Gray/ Blue
Green/Black - Green/Black
Black to temp sensor lead

Title: Re: 1988 K100RS SE Temp Gauge and gauge wiring harness needed
Post by: 50abo on May 14, 2013, 06:04:46 AM

Quote from: frankenduck on July 19, 2012, 08:17:37 PM

Just wire it up yourself.  It's very easy.

Brown - Brown
Gray/Blue - Gray/ Blue
Green/Black - Green/Black
Black to temp sensor lead

I have the schematics and I found that there might be a 4-pin 'Connector for Additional Instruments' as it stands in the papers of K100RS. I have not found a similar connector in my K1100RS -94.
If there is such a connector, please tell me where. I would like to make the connection 'right way'.

In the relay box under the tank there is a round connector with four holes, but the colours of the wires don't match.

My page: http://ptm2.cc.utu.fi/~ptmusta/kuvat/MP/BMW/ (http://ptm2.cc.utu.fi/~ptmusta/kuvat/MP/BMW/)