MOTOBRICK.COM

TECHNICAL MOTOBRICK WRENCHING In Remembrance of Inge K. => The Motobrick Workshop => Topic started by: frankenduck on July 11, 2012, 11:41:39 AM

Title: Steering Lock on K75s and 2V K100s
Post by: frankenduck on July 11, 2012, 11:41:39 AM

Attached is a scan from the rider's manual on how to engage the steering lock.  Note that on many bikes it may never have been used so the grease in it may have become hardened so that it is difficult to turn.  It's also possible that the ignition switch has been changed so you might not even have the right key for it.  Be careful not to turn too hard and break the key off in the lock.

Title: Re: Steering Lock on K75s and 2V K100s
Post by: argent brick on July 11, 2012, 12:43:09 PM

Well, I tried mine and it works. I can see why someone would never use it though.

Title: Re: Steering Lock on K75s and 2V K100s
Post by: BlossomStein on July 02, 2015, 08:59:42 PM

4v K100RS: previous owner told me there was no steering lock on them... I found it quite accidentally the other day, and then promptly lost it.