MOTOBRICK.COM

TECHNICAL MOTOBRICK WRENCHING In Remembrance of Inge K. => The Motobrick Workshop => Topic started by: sh00ter on July 03, 2012, 01:54:38 PM

Title: Oil on breather hose (side of block too)
Post by: sh00ter on July 03, 2012, 01:54:38 PM

hey all -  I am guessing the oily mess here is from the breather tube on the airbox.   

If it is oily, I assume that means I have a leak in it?  How painful is it to replace and where's the other end live?

(https://lh3.googleusercontent.com/-6pAqyi5R4gk/T_MwdT9qNyI/AAAAAAAADHs/khMdIWGvZJA/s640/20120703_124344.jpg)

(https://lh6.googleusercontent.com/-JVGsd5wIC_U/T_Mwnd3BFXI/AAAAAAAADH0/ggU7njkn444/s640/20120703_124338.jpg)

Title: Re: Oil on breather hose (side of block too)
Post by: Inge K. on July 03, 2012, 02:02:24 PM

Quote from: sh00ter on July 03, 2012, 01:54:38 PM

where's the other end live?

Connected to the cyclonic oil separator, inside the top half of the air filter housing.
Have a look in this (http://k100rt.aforumfree.com/t3842-k100rs-breather-hose-replace) thread.

Inge K.

Title: Re: Oil on breather hose (side of block too)
Post by: tsbt on July 04, 2012, 10:44:26 AM

Waiting for a bunch of hoses on back order for when I do mine. Also figured it was best to do all my hoses while I'm in there so I don't have to do it again later. From what I've learned about replacing all this from Inge, Frankenduck, Mystic, GITH and others :hail:, it's a bit tricky plus getting the air box out for access is like birthing a small child, so lube up that baby up!!! :eek: