MOTOBRICK.COM

TECHNICAL MOTOBRICK WRENCHING In Remembrance of Inge K. => The Motobrick Workshop => Topic started by: tsbt on June 30, 2012, 08:56:14 PM

Title: 1 cam cover bolt with a double bushing, puzzled.
Post by: tsbt on June 30, 2012, 08:56:14 PM

Cam cover bolts all look the same except for one that has a double bushing, can anyone tell me where it goes on the cover? Want to ensure everything is in its rightful place.
Cheers
C  :dunno2:

Title: Re: 1 cam cover bolt with a double bushing, puzzled.
Post by: frankenduck on June 30, 2012, 09:01:04 PM

They should all be the same, :dunno

Title: Re: 1 cam cover bolt with a double bushing, puzzled.
Post by: tsbt on June 30, 2012, 10:36:46 PM

This is what I've got. Total mystery. Guess I should've taken pictures of where it came out of :embarass: here's a pic of the regular and the absurd one.

Title: Re: 1 cam cover bolt with a double bushing, puzzled.
Post by: Rick G on June 30, 2012, 10:40:29 PM

Leave the second bit of and you will soon see if it was needed :eek:

Title: Re: 1 cam cover bolt with a double bushing, puzzled.
Post by: tsbt on June 30, 2012, 10:50:48 PM

My bad I called it the cam cover, it's the crank cover that this came from. Don't remember switching any bolts between covers?! Oi  :hmm:

Title: Re: 1 cam cover bolt with a double bushing, puzzled.
Post by: tsbt on July 02, 2012, 11:47:00 AM

Torqued the strange crank bolt with the double bushing back on, it pinches the gasket in the right corner just enough that its sticking out. :tongue guess I could cut the extra rubber off. Whatever. Reassembling everything today after a ton of repairs. New repainted fairings/tank etc should arrive next week so I can start riding. Pretty stoked for that day to happen.  :drool: