MOTOBRICK.COM

TECHNICAL MOTOBRICK WRENCHING In Remembrance of Inge K. => The Motobrick Workshop => Topic started by: BBKME on May 11, 2012, 07:32:32 PM

Title: INJECTOR COVER
Post by: BBKME on May 11, 2012, 07:32:32 PM

I've been searching high and low for an injector cover but never did locate one.  Spoke with San Jose BMW as they thought they had a NOS one collecting dust on a shelf somewhere.  That turned out to be another dead end.  They did inform me that they just sold the pattern to somebody who plans on making them again.  Said to keep on eye out for some in the market place in about a month or so. 

Title: Re: INJECTOR COVER
Post by: frankenduck on May 11, 2012, 07:50:40 PM

It's pretty easy to make your own.  I just cut and bent some 1/8" thick aluminum stock I had hanging around in the basement, drilled some holes in it and then had it powder coated.

Title: Re: INJECTOR COVER
Post by: frodef on May 12, 2012, 03:34:21 PM

How about these?

http://www.motorworks.co.uk/vlive/Shop/Parts.php?T=5&NU=15&M=40&Ct=BA&SbCt=BA_15_40_BA_75 (http://www.motorworks.co.uk/vlive/Shop/Parts.php?T=5&NU=15&M=40&Ct=BA&SbCt=BA_15_40_BA_75)