MOTOBRICK.COM

TECHNICAL MOTOBRICK WRENCHING In Remembrance of Inge K. => The Motobrick Workshop => Topic started by: johnny on January 21, 2012, 07:56:48 PM

Title: Pyramid Plastics Fender Extenda
Post by: johnny on January 21, 2012, 07:56:48 PM

advertised like this...

(http://i236.photobucket.com/albums/ff192/owrstrich/DROID/1003bfc3.jpg)

shows up like this...

(http://i236.photobucket.com/albums/ff192/owrstrich/DROID/IMAG0283.jpg)

with little self tappers...

(http://i236.photobucket.com/albums/ff192/owrstrich/DROID/IMAG0286.jpg)

i scored some flat heads with nylocks...

(http://i236.photobucket.com/albums/ff192/owrstrich/DROID/IMAG0287.jpg)

(http://i236.photobucket.com/albums/ff192/owrstrich/DROID/IMAG0288.jpg)

the fender extender can be scored here (http://www.beemerboneyard.com/fe05401.html)... or frankenduck will trade you an oem for a bottle of makers mark...

j o

Title: Re: Pyramid Plastics Fender Extenda
Post by: frankenduck on January 21, 2012, 09:23:23 PM

Too late now but since you're screwing/bolting it on anyhow, I prefer to ditch the doublesitck tape and fill that area in with a continuous stream of silcone.  It keeps the dirty water from creeping through...

Title: Re: Pyramid Plastics Fender Extenda
Post by: johnny on January 22, 2012, 11:41:27 AM

can it be red silicone or does it have to be black...

 :tongue

j o

Title: Re: Pyramid Plastics Fender Extenda
Post by: frankenduck on January 22, 2012, 01:21:34 PM

I generally use black or clear.....

Title: Re: Pyramid Plastics Fender Extenda
Post by: Chaos on January 22, 2012, 04:06:06 PM

Red silicon would be best to prevent the plastic fender from rusting.