MOTOBRICK.COM

MOTOBRICK MARKETPLACE => FS WTB WTT ~ Bikes ~ Parts ~ Gear => Topic started by: nadrol on January 27, 2026, 02:08:29 AM

Title: Seat Latch Catch, Cafe Crankcase Ventilation Hose, Spal Fan Mount
Post by: nadrol on January 27, 2026, 02:08:29 AM
I have a few items here that I'm thinking about selling after initially developing these for my own bike (K1100RS)

OEM+ replica replaces the K75/100/1100 BMW catch within the seat latch (mounted to the frame) that tends to snap in half. This part has additional geometry to strengthen the weak points of the OEM design and is made from industrial grade MJF nylon material.
The OEM latch assembly is easy to repair... remove the two fasteners that hold it to the frame and then pry apart the two halves of the latch body.

* IMG_20260107_200502 (1).jpg (23.03 kB . 677x576 - viewed 39 times)
For K1100 and 90+ K100 models.  Made from industrial grade MJF TPU material. Stock separator can be blocked off, or the airbox removed, and this simplified part used instead. This is a prototype: the final part would be dyed black and include mounting hardware.

* IMG_20260126_231029.jpg (19.12 kB . 768x576 - viewed 41 times)

* IMG_20260126_231132~2.jpg (14.4 kB . 768x371 - viewed 36 times)

* IMG_20260126_212910.jpg (82.51 kB . 768x576 - viewed 39 times)
For K1/75/100/1100 to mount a Spal VA22-AP11/C-50A or 30100402. FFF ASA material.

* IMG_20250615_085435.jpg (81.61 kB . 768x576 - viewed 38 times)

* IMG_20250615_064737.jpg (63.85 kB . 768x576 - viewed 40 times)

Any interest?