MOTOBRICK.COM

TECHNICAL MOTOBRICK WRENCHING In Remembrance of Inge K. => The Motobrick Workshop => Topic started by: frankenduck on January 11, 2012, 01:53:04 PM

Title: Troubleshooting K100 (2V) ignition issues
Post by: frankenduck on January 11, 2012, 01:53:04 PM

Attached to this post is a PDF on troubleshooting K100 ignition issues.  It was authored by
Bertrand Vogel of the K100 Forum (http://http://k100rt.aforumfree.com/).

Title: Re: Troubleshooting K100 (2V) ignition issues
Post by: mystic red on May 21, 2012, 12:14:09 PM

Here's a link to the page.

http://hrsbstaff.ednet.ns.ca/bvogel/K100/download/bike-wont-start1.htm (http://hrsbstaff.ednet.ns.ca/bvogel/K100/download/bike-wont-start1.htm)