MOTOBRICK.COM

MOTOBRICK MARKETPLACE => FS WTB WTT ~ Bikes ~ Parts ~ Gear => Topic started by: diesis on October 28, 2024, 08:37:09 PM

Title: WTB K75S Lower Cowl / Chin Guard / Belly Pan
Post by: diesis on October 28, 2024, 08:37:09 PM

Looking for the fairing from a K75s that fits under the engine.  I'm not sure with the proper term (is it a chin guard, lower cowl, belly pan, brick beard), the left side would have BMW p/n: 46631455195.  Mounting on a K75c, so also interested in any mounting hardware.  Shipping to 53704 (also open to pick up in ~100 mile radius). 

Want to integrate into a cafe project that has been going on since before it was cool and will finish... someday.... 

(https://www.motobrick.com/gallery/4/3333-281024201530.jpeg)

Title: Re: WTB K75S Lower Cowl / Chin Guard / Belly Pan
Post by: frankenduck on October 28, 2024, 09:23:05 PM

A lot of people call it a belly pan but the BMW parts fiche name is spoiler.

Parts Diagram here:
https://www.realoem.com/bmw/enUS/showparts?id=0572-USA---K569-BMW-K%2075%20S%20(0563,0572)&diagId=46_0155

The most difficult part to find for these is the front bracket (Part 15) as sometimes they crack and are no longer available from BMW. Therefore try to find one that comes with the brackets.

The top bracket (26) is nice to have buy not really necessary.

Title: Re: WTB K75S Lower Cowl / Chin Guard / Belly Pan
Post by: frankenduck on October 28, 2024, 09:28:32 PM

I upgrade Belly pans with a strip of Line-X down the middle to prevent gravel damage and also swap in a perforated stainless steel grille.

(https://i.imgur.com/foqHlM7.jpeg)

Title: Re: WTB K75S Lower Cowl / Chin Guard / Belly Pan
Post by: diesis on October 31, 2024, 09:38:29 AM

Thanks!  Appreciate the info on naming, mounts, and the Line-X trick. 

Title: Re: WTB K75S Lower Cowl / Chin Guard / Belly Pan
Post by: Laitch on October 31, 2024, 02:38:33 PM

There's a used spoiler on eBay and some at caferacerwebshop in Holland.

Title: Re: WTB K75S Lower Cowl / Chin Guard / Belly Pan
Post by: Martin on October 31, 2024, 04:52:38 PM

I have sprayed the front of my belly pan with bed liner. But a good bucket flap is even better. https://www.motobrick.com/index.php?topic=7914.msg57660#msg57660     https://www.k100-forum.com/t18363-new-improved-bucket-flap-4-50#210533

Bucket Flap 2.jpg (2.88 kB . 151x113 - viewed 610 times)

Title: Re: WTB K75S Lower Cowl / Chin Guard / Belly Pan
Post by: diesis on November 09, 2024, 08:18:29 PM

Checked in on the aftermarket spoiler (Two versions: "Low" https://www.caferacerwebshop.com/en/bmw-k100-motor-spoiler-low.html and "High" https://www.caferacerwebshop.com/en/bmw-k100-bug-spoiler-high.html).  The "high" version will only fit a K100 at this time, but a K75 version is in the works (*hopefully*).

Title: Re: WTB K75S Lower Cowl / Chin Guard / Belly Pan
Post by: Kaos on November 11, 2024, 05:23:57 AM

I dont know if you use Instagram, but if you do, you might want to shoot 777even a message ( i dont know if hes on other socials).
He handcrafts spoilers and stuff with fibreglass. I myself, and a few other rebuilders I know have used his work, and first of it fits like a glove and the quality is superb.

Title: Re: WTB K75S Lower Cowl / Chin Guard / Belly Pan
Post by: Laitch on November 11, 2024, 11:00:01 AM

Quote from: Kaos on November 11, 2024, 05:23:57 AM

I dont know if you use Instagram, but if you do, you might want to shoot 777even a message . . ..

His Instagram tag is 777.even. The dot wards off music of questionable merit.  :laughing4-giggles:  Also on Facebook.

Title: Re: WTB K75S Lower Cowl / Chin Guard / Belly Pan
Post by: DrBombay on November 17, 2024, 08:59:19 AM

Quote from: frankenduck on October 28, 2024, 09:28:32 PM

I upgrade Belly pans with a strip of Line-X down the middle to prevent gravel damage and also swap in a perforated stainless steel grille.

Thats awesome!!

Title: Re: WTB K75S Lower Cowl / Chin Guard / Belly Pan
Post by: natalena on November 17, 2024, 09:46:50 PM

Fiberglassing the two belly pan sides together is one of my favorite mods. The bolts/rubber grommets line up perfectly for reinstalling, and there's no buzzing from the sides/radiator mesh.

Title: Re: WTB K75S Lower Cowl / Chin Guard / Belly Pan
Post by: volador on December 28, 2024, 11:32:03 AM

Quote from: natalena on November 17, 2024, 09:46:50 PM

Fiberglassing the two belly pan sides together is one of my favorite mods. The bolts/rubber grommets line up perfectly for reinstalling, and there's no buzzing from the sides/radiator mesh.

Are you still running that feckin road bike rack mod on that pretty K?