MOTOBRICK.COM

TECHNICAL MOTOBRICK WRENCHING In Remembrance of Inge K. => The Motobrick Workshop => Topic started by: K100 Dave on March 31, 2024, 08:01:03 AM

Title: Failure to start, blown fuse to trickle charger
Post by: K100 Dave on March 31, 2024, 08:01:03 AM

Hi all
I wonder if anyone can help with this one, I was plugging in my trickle charger to the sae connector (that is fused and goes to my battery) when it crackled and the charger was flashing (indicating that it isn't charging) so I checked the fuse that is connected to the in the sae cable that is connected to my battery and the 7.5 amp fuse had blown,
Not a big deal, but now my bike won't start, it turns over and I can hear the fuel pump.
I checked to spade fuses on the side of the bike but all seem fine, somthing has blown but at the moment I'm not sure what ?

Title: Re: Failure to start, blown #7 fuse
Post by: Laitch on March 31, 2024, 09:21:37 AM

Welcome to the forum, Dave. Tell us the year of your Brick, how long you've had it, how many miles on its odometer and how many miles you've put on it.