MOTOBRICK.COM
TECHNICAL MOTOBRICK WRENCHING In Remembrance of Inge K. => The Motobrick Workshop => Topic started by: TommyT on August 13, 2022, 10:41:38 AM
-
I been looking at the Bert troubleshooting guide to diagnose a poor running K75. I going to test the water temperature sensor and I am confused which pin on the electronic fuel module connector to do the test. there is one diagram that seems to point to #10 and one that point to #10. see attached diagrams. [ Invalid Attachment ]
-
Go with the lower drawing; the upper drawing has the error. Just like the text in printed matter, diagrams and drawings need knowledgeable second-person review to alert the authors to possible errors. That one was missed.
-
Okay so #10 it is. Thanks!
-
112350